Personal Protection Equipment

Ariat M4 FR Jeans Flint

This low-rise boot cut FR jean has a relaxed fit through the waist and thighs. Constructed of 13-ounce cotton FR denim, these jeans have the Flint wash finish. Nice subtle detail stitched on the back pockets and a classic boot cut leg, it’s hard not to look good.

Features include no-rub comfort inseams, extra deep front pockets, anchored belt loops, and ring-spun cotton. CAT 2, NFPA 70E, NFPA2112, arc rating ATPV 20 cal/cm2

• Low rise boot cut
  
• 13-ounce cotton FR denim
  
• Stitched detail on back pockets
  
• Extra deep front pockets

Ariat M4 FR Jeans Shale

The M4 takes on a classic look in the Shale finish and the boot cut. The M4 design has a relaxed fit through the waist, hips, and thighs.
Constructed of 13-ounce cotton ring-spun FR denim, they’re soft to the skin, but rugged enough for everyday on the job.
Features include no-rub comfort inseams, extra deep front pockets, anchored belt loops, and ring-spun cotton. CAT 2, NFPA 70E, NFPA2112, arc rating ATPV 20 cal/cm2

• Low rise boot cut
  
• 13-ounce cotton FR denim
  
• Stitched detail on back pockets
  
• Extra deep front pockets

Wrangler FR Advanced Comfort Jean

Looking for a new pair of jeans to try? Look no further than Wrangler’s FRAC47D men’s work jean. These are made up of a 94% cotton, 1% spandex, & 5% polyester 12-ounce blend that still meets Hazard Risk Category 2 classifications. This unique blend gives you more stretch and allows you to be more relaxed and not binded up like traditional fitting jeans. These flameresistant jeans will keep you comfortable all day long.
Advanced Comfort

• 4-Way Stretch
  
• Five Pockets
  
• Rugged
  
• HRC 2
  
• 36” inseam length is considered a special cut garment and may take longer to process

Wrangler FR Jeans-Original Fit

Classic original fit Wrangler FR jeans, designed with the original five pocket styling and straight leg opening to fit over boots. Built from tough 14.75-ounce 100% cotton FR denim, they’re prewashed to have that broken-in feel.
Features include brass zippered fly, reinforced pockets with Nomex  FR thread, and safety orange Wrangler FR id. CAT2, NFPA 70E, NFPA2112, ATPV 23.8 cal/cm2

• Original 5 pocket style
  
• 14.75 ounce prewashed
  
• Legs fits over boots
  
• 100% FR denim cotton
  
• CAT 2

Wrangler FR Jeans-Original Fit

You can wear Wrangler FR3W050 Men’s RIGGS Workwear FR Flame Resistant Relaxed Fit Jeans for unmatched workwear safety. They’re made of heavyweight, flame resistant cotton denim. And they feature a variety of safety features, like extra deep flame-resistant front pockets, reinforced back pockets, and an orange outside ID, for high visibility. These jeans feature the improved, room2move fit, and they’re finished with an action gusset, for ease of movement. The rise sits at your natural waist for maximum coverage and comfort, the leg openings fit over your boots, and the sturdy belt loops can easily handle your heavy work belt.

• Safety orange outside ID for high visibility
  
• Color: Flame Resistant (FR3W050)
  
• Made of heavyweight, 14.5 oz., flame resistant 100% cotton denim
  
• Room2move fit features an improved fit in the seat, thigh, knees, and bottom leg openings
  
• Classic 5-pocket styling
  
• High rise jeans have a relaxed fit
  
• Oversized watch pocket
  
• Zipper fly with button closure
  
• Leg opening fits over boots
  
• Extra deep, 13 inches, flame resistant, treated front pockets
  
• Durable, reinforced back pockets
  
• 0.5 x 2.5-inch belt loops handle a work belt

Lapco FR Modern Jeans | 10oz. 100% Cotton Denim

LAPCO FR™ flame-resistant modern jeans are made to handle anything your workday might throw at you. These work jeans include all the needed safety features while being stylish and comfortable. From the worksite to the meeting room, these FR Modern Jeans get the job done.

• Low-rise, boot-cut jean.
  
• Lighter, 10oz. fabric for comfort.
  
• Styled like your favorite Jeans.
  
• Dirty wash and two-tone topstitching.
  
• Bar tacks on stress points.
  
• Non-conductive button closure.
  
• Sewn with Nomex  thread.
  
• Brass zipper with Nomex  tape.

Lapco FR Canvas Cargo Pant

LAPCO FR Flame-Resistant Canvas Pants keep you safe on the work site with a tough yet lighter weight basket weave canvas material made of 88% Cotton and 12% High-Tenacity Nylon. Westex’s UltraSoft finish lends a smooth hand to these pants that are made to withstand hard work.

• ATPV 9.8 cal/cm 
  
• HRC/CAT 2
  
• NFPA 70E Compliant
  
• UL Classified ASTM F1506
  
• UL Classified NFPA 2112
  

• UltraSoft 8.5oz Basketweave, Fiber Content 88% Cotton / 12% High Tenacity Nylon,Mid-Rise, Straight Leg Pant, Relaxed Fit Through Seat and Thighs
  
• Non-Conductive Button Closure
  
• Traditional 5-Pocket Style Front & Back Pockets
  
• Utility Pocket on Left Leg
  
• Low Profile, Inset Side Entry Slit Pocket with Zip Closure on Right Leg
  
• Tripe Needle Stitching on Out Seams and Inseam
  
• Sewn with Nomex Thread
  
• Brass Zipper with Nomex Tape

Lapco FR Cargo Uniform Pants

LAPCO FR flame-resistant uniform pants enhanced with cargo pockets and 6.5oz. lightweight inherent fabric that has superior breathability and outstanding moisture management while still meeting HRC/CAT 2 with an ATPV of 8.9 cal/cm2.

• Mid-rise pants with straight leg openings.
  
• Two slack-style front pockets.
  
• Left and right cargo pockets on the legs.
  
• Inset back uniform pockets.
  
• Non-conductive button and snap closures.
  
• Double-needle stitching on pockets, out seams, waist, and inseams.
  
• Sewn with Nomex  thread.
  
• Brass zipper with Nomex  tape.
  
• An excellent arc-rated flame-resistant fabric for electric arc flash and flash fire protection.

Bulwark Lightweight Nomex FR Work Pant

Looking for a solid flame-resistant work pant? This lightweight work pant provides a stylish design with a button closure. Two slack style front pockets provide storage with a professional look. Two set-in hip pockets provide additional storage for your tools or personal effects. Arc Rating ATPV 5.2 cal/cm2

NFPA  2112 COMPLIANT

CATEGORY 1 PROTECTION

FABRIC
Flame resistant, 6 oz. (205 g/m²) Nomex  IIIA

BLEND
93% Nomex  Aramid/ 5% Kevlar  Aramid/2% Other Fiber

CLOSURE
Waistband with button closure

POCKET
Two slack-style front pockets left hip
pocket with button closure

COUNTRY ORIGIN
Imported of Fabric Made in USA

Rasco Westex Ultrasoft Uniform Pants

• 9 oz. Westex Ultrasoft
  
• 88% Cotton / 12% High Tenacity Nylon
  
• Fully Finished Waistband
  
• Two Rear Welt Pockets
  
• Two Front Deep Slash Pockets

Bulwark FR Tactical Ripstop Pant

These cargo pants are UL certified to NFPA  1975 and flame resistant with articulated knees for extra mobility. The Tactical 6.1 oz Ripstop Pant has two large cargo pockets with hook-and-loop flap closures, and the right cargo features additional storage pocket. There are two rear welt pockets with hook-and-loop flap closures.

• NFPA 2112 Compliant
  
• UL Certified to NFPA 1975

Topps Safety Apparel Flame Resistant Uniform Pants

Topps specializes in flame resistant work clothing for use by general industry, oil and gas refineries, electric utility workers, electrical contractors, and other work environments where FR apparel is required for personal protection and safety. These pants have an NFPA 2112 and NFPA 70E Arc Rating.

• Fabric: 6.0 oz. per square yard DuPont NOMEX aramid
  
• Uniform style with permanent creases
  
• Hook and eye closure with French fly
  
• Bottoms of side pockets are reinforced using an X bartack
  
• NOMEX ripstop pocketing
  
• Outseams are reinforced by topstitching entire length
  
• Self-locking brass zipper with NOMEX zipper tape
  
• Seven belt loops will take 2” belts
  
• Two welted hip pockets
  
• Please note: Hemmed pants are nonreturnable per manufacturer.