Elevated monitors are ideally suited for problem applications that are difficult to reach from ground level with fixed or portable equipment. Typical installations include dock protection and high hazard petrochemical areas. Elevating the monitor serves high-hazard areas that may otherwise be obstructed, putting the monitor at the appropriate height to reach the target.
Freestanding monitors range from 10 to 50 feet (3 to 15m), and supported monitors up to 111 feet (34m), depending upon the flow/distance requirement and water/pressure available for the application.
ELEVATED MONITORS Waterways available in 2-1/2” (64mm), 3” (76cm) and 4” (102cm), depending on flow rate. Red epoxy coat monitor finish Freestanding monitors have an “inner” waterway with an outer drive tube for horizontal movement at the base, along with vertical motion handle control with stainless steel cable attached to the monitor for vertical option.
Supported monitors consist of the base portion with the vertical and horizontal motion control mounted with the appropriate cable length and the upper portion consisting of the monitor with a 4” (102cm) male NPT base complete with one reaction support. Inter-connecting pipe is available upon request. Galvanized steel drive tube Stainless steel elevation cables Vertical motion control handle Rotation lock Elevation lock ELEVATED MONITORS Model Description FP900200 Supported with base intake and oscillator, flow rate up to 1000GPM FP900202 Self-supported with base intake, flow rate up to 1000GPM FP900300 Free standing with oscillator, flow rate 500GPM FP900301 Free standing with oscillator, flow rate 750GPM FP900303 Free standing, flow rate up to 1000GPM.
The Fire Pro division produces FM Approved elevated monitors that allow for safe and effective water emission for top fire safety performance. FM Approval certifies that all Fire Pro elevated monitors have been objectively tested and conform to the highest national and international standards. Fire Pro elevated monitors come in freestanding and oscillating models, providing fire safety professionals with full range of water discharge during emergencies.
Base and upper that can be fabricated to any height (up to 34’) with customer supplied intermediate pipe